Power-X is a professional adhesive and sealant designed for construction, fabrication and industrial jobs where you need dependable bonding, sealing and long-term durability.
Its one-component, high-modulus hybrid formulation cures with humidity to create a strong, elastic bond across a wide range of common building materials. Suitable for interior and exterior use, Power-X is a practical choice for panels, skirting boards, windowsills, roofing, coachwork, metal joints, shipbuilding and general-purpose installations.
Why choose Power-X?
- Strong multi-surface adhesion for a wide range of construction and industrial applications
- Instant grab properties to help position and bond lightweight materials
- Indoor and outdoor use with high resistance to ageing and weathering
- Permanent elasticity to accommodate movement in suitable applications
- Paintable once cured with water-based paints
- Isocyanate- and silicone-free formulation
- Almost odourless curing and low emissions
- Adheres without primer to most suitable surfaces, including some damp surfaces
What is Power-X used for?
Power-X combines the functions of a construction adhesive and sealant, making it suitable for a broad range of professional and general-purpose jobs.
Typical applications include:
- Bonding panels and skirting boards
- Installing windowsills
- Roofing applications
- Coachwork and vehicle body applications
- Metal joints and connections
- Shipbuilding and marine construction applications where continuous water exposure is not involved
- Timber bonding
- General construction, maintenance and DIY installations
Built for lasting indoor and outdoor bonds
Power-X is formulated to provide durable adhesion while retaining elastic properties after curing. Its weather and ageing resistance makes it useful for suitable exterior applications as well as everyday indoor construction work.
The cured adhesive has a stated temperature resistance of -40°C to +90°C, helping it perform across a wide range of service conditions.
Paintable for a cleaner finish
Once fully cured, Power-X can be painted with water-based paints, making it useful for visible installations where the finished bond or seal needs to blend into surrounding surfaces.
If using solvent-based paint, test compatibility first before completing the full application.
How to apply Power-X
- Make sure the substrate is solid, clean and free from grease and dust.
- Clean the surface with an appropriate cleaner where required.
- Apply Power-X in vertical stripes spaced approximately 10–20 cm apart.
- Position the materials and press them together so the adhesive stripes remain approximately 2–3 mm thick between the material and substrate.
- Do not apply Power-X in dots.
- Use temporary support or clamping where the application requires it.
- Always test adhesion before proceeding with the full installation.
No primer is generally required on most suitable substrates. Porous substrates should be pre-treated with an appropriate primer.
Power-X technical information
| Base | Hybrid |
|---|---|
| Application temperature | +5°C to +40°C |
| Skin formation | Approximately 10 minutes at +23°C / 50% RH |
| Curing rate | Approximately 1.5–2 mm per 24 hours at +23°C / 50% RH |
| Temperature resistance | -40°C to +90°C |
| Elongation at break | 200% |
| Tensile strength | 1.60 N/mm² |
| Shore-A hardness | 57 |
| Shelf life | 18 months in original unopened packaging when stored as recommended |
| Storage | Store between +5°C and +25°C away from direct sunlight |
Power-X limitations
Power-X is versatile, but choosing the right adhesive for the job matters. It is not suitable for the following applications:
- Bonding heavy loads without clamps or suitable support during curing
- Mirrors
- PE (polyethylene)
- PP (polypropylene)
- PC (polycarbonate)
- PMMA (acrylic)
- PTFE
- Soft plastics
- Neoprene
- Bituminous substrates
- Continuous exposure to water
- Movement joints
- Applications involving chlorides, including swimming pool environments
Always test adhesion and compatibility before full application. For heavier materials, use appropriate temporary support or clamping while the adhesive cures.
One product for bonding and sealing
For panels, skirting, timber, roofing, metalwork and general construction jobs, Power-X gives you a practical combination of adhesion, sealing, elasticity and weather resistance in one product.
High-performance with every bond.
No delivery surcharge on orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.
Power-X is a professional adhesive and sealant designed for construction, fabrication and industrial jobs where you need dependable bonding, sealing and long-term durability.
Its one-component, high-modulus hybrid formulation cures with humidity to create a strong, elastic bond across a wide range of common building materials. Suitable for interior and exterior use, Power-X is a practical choice for panels, skirting boards, windowsills, roofing, coachwork, metal joints, shipbuilding and general-purpose installations.
Why choose Power-X?
- Strong multi-surface adhesion for a wide range of construction and industrial applications
- Instant grab properties to help position and bond lightweight materials
- Indoor and outdoor use with high resistance to ageing and weathering
- Permanent elasticity to accommodate movement in suitable applications
- Paintable once cured with water-based paints
- Isocyanate- and silicone-free formulation
- Almost odourless curing and low emissions
- Adheres without primer to most suitable surfaces, including some damp surfaces
What is Power-X used for?
Power-X combines the functions of a construction adhesive and sealant, making it suitable for a broad range of professional and general-purpose jobs.
Typical applications include:
- Bonding panels and skirting boards
- Installing windowsills
- Roofing applications
- Coachwork and vehicle body applications
- Metal joints and connections
- Shipbuilding and marine construction applications where continuous water exposure is not involved
- Timber bonding
- General construction, maintenance and DIY installations
Built for lasting indoor and outdoor bonds
Power-X is formulated to provide durable adhesion while retaining elastic properties after curing. Its weather and ageing resistance makes it useful for suitable exterior applications as well as everyday indoor construction work.
The cured adhesive has a stated temperature resistance of -40°C to +90°C, helping it perform across a wide range of service conditions.
Paintable for a cleaner finish
Once fully cured, Power-X can be painted with water-based paints, making it useful for visible installations where the finished bond or seal needs to blend into surrounding surfaces.
If using solvent-based paint, test compatibility first before completing the full application.
How to apply Power-X
- Make sure the substrate is solid, clean and free from grease and dust.
- Clean the surface with an appropriate cleaner where required.
- Apply Power-X in vertical stripes spaced approximately 10–20 cm apart.
- Position the materials and press them together so the adhesive stripes remain approximately 2–3 mm thick between the material and substrate.
- Do not apply Power-X in dots.
- Use temporary support or clamping where the application requires it.
- Always test adhesion before proceeding with the full installation.
No primer is generally required on most suitable substrates. Porous substrates should be pre-treated with an appropriate primer.
Power-X technical information
| Base | Hybrid |
|---|---|
| Application temperature | +5°C to +40°C |
| Skin formation | Approximately 10 minutes at +23°C / 50% RH |
| Curing rate | Approximately 1.5–2 mm per 24 hours at +23°C / 50% RH |
| Temperature resistance | -40°C to +90°C |
| Elongation at break | 200% |
| Tensile strength | 1.60 N/mm² |
| Shore-A hardness | 57 |
| Shelf life | 18 months in original unopened packaging when stored as recommended |
| Storage | Store between +5°C and +25°C away from direct sunlight |
Power-X limitations
Power-X is versatile, but choosing the right adhesive for the job matters. It is not suitable for the following applications:
- Bonding heavy loads without clamps or suitable support during curing
- Mirrors
- PE (polyethylene)
- PP (polypropylene)
- PC (polycarbonate)
- PMMA (acrylic)
- PTFE
- Soft plastics
- Neoprene
- Bituminous substrates
- Continuous exposure to water
- Movement joints
- Applications involving chlorides, including swimming pool environments
Always test adhesion and compatibility before full application. For heavier materials, use appropriate temporary support or clamping while the adhesive cures.
One product for bonding and sealing
For panels, skirting, timber, roofing, metalwork and general construction jobs, Power-X gives you a practical combination of adhesion, sealing, elasticity and weather resistance in one product.
High-performance with every bond.
No delivery surcharge on orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.