Ritetite Turbo is a one-component liquid superglue designed for ultra-fast bonding where a thin, free-flowing adhesive is preferred. With a clear finish and very low viscosity, it’s ideal for applications that benefit from seeping, wicking, and flexibility—getting into tight joins, hairline cracks, and close-fitting parts where thicker gels can’t reach.
It hardens rapidly by reacting with surface moisture, allowing most materials to bond in around 30 seconds (surface and conditions dependent). This makes Ritetite Turbo a great fit for high-speed industrial production, repairs, and assembly tasks that demand fast handling strength and a clean finish.
Supplied in a 25ml container with an integrated nozzle for controlled, accurate dispensing.
Key characteristics
-
Clear finish
-
Bonds most materials in ~30 seconds (application dependent)
-
Low viscosity / high liquidity for wicking and seeping into joints
-
Best where flexibility and penetration are required
-
25ml container
-
Integrated nozzle for easy application
Surface preparation (for best bond)
Surfaces should be clean, dry and grease-free before applying adhesive. Degrease using a suitable solvent such as acetone or isopropanol.
Some metals (e.g. aluminium, copper and alloys) benefit from light abrasion (emery cloth or similar) to remove oxide before bonding.
Directions for use
-
Apply adhesive sparingly to one surface.
-
Bring components together quickly, correctly aligned.
-
Apply firm pressure so adhesive spreads into a thin film.
-
Do not disturb or re-align until initial strength is achieved (often seconds).
-
Remove surplus adhesive using an appropriate solvent such as nitromethane or acetone.
Note: For difficult or porous surfaces, use a super glue accelerator/activator. For bonding PP, PE, PTFE or silicone, use a suitable primer first.
No delivery surcharge on orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.
Ritetite Turbo is a one-component liquid superglue designed for ultra-fast bonding where a thin, free-flowing adhesive is preferred. With a clear finish and very low viscosity, it’s ideal for applications that benefit from seeping, wicking, and flexibility—getting into tight joins, hairline cracks, and close-fitting parts where thicker gels can’t reach.
It hardens rapidly by reacting with surface moisture, allowing most materials to bond in around 30 seconds (surface and conditions dependent). This makes Ritetite Turbo a great fit for high-speed industrial production, repairs, and assembly tasks that demand fast handling strength and a clean finish.
Supplied in a 25ml container with an integrated nozzle for controlled, accurate dispensing.
Key characteristics
-
Clear finish
-
Bonds most materials in ~30 seconds (application dependent)
-
Low viscosity / high liquidity for wicking and seeping into joints
-
Best where flexibility and penetration are required
-
25ml container
-
Integrated nozzle for easy application
Surface preparation (for best bond)
Surfaces should be clean, dry and grease-free before applying adhesive. Degrease using a suitable solvent such as acetone or isopropanol.
Some metals (e.g. aluminium, copper and alloys) benefit from light abrasion (emery cloth or similar) to remove oxide before bonding.
Directions for use
-
Apply adhesive sparingly to one surface.
-
Bring components together quickly, correctly aligned.
-
Apply firm pressure so adhesive spreads into a thin film.
-
Do not disturb or re-align until initial strength is achieved (often seconds).
-
Remove surplus adhesive using an appropriate solvent such as nitromethane or acetone.
Note: For difficult or porous surfaces, use a super glue accelerator/activator. For bonding PP, PE, PTFE or silicone, use a suitable primer first.
No delivery surcharge on orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.