Create visible hazard zones with dependable traction. RiteGrip™ Anti-Slip Tape combines an aggressive, industrial-grade grit with a tough vinyl backing to help reduce slips on stairs, ramps, platforms and walkways.
Choose from four colour options—Yellow/Black Striped, Black, Yellow, or White—all using a durable solvent-acrylic adhesive designed to bond strongly to clean, smooth, sealed surfaces, indoors or outdoors.
Colour Options
Pick the look that matches your safety plan and site layout:
-
Yellow/Black Striped: High-contrast hazard marking for edges, steps, and danger zones
-
Black: Clean, low-contrast traction for general safety upgrades
-
Yellow: Bright visibility for walkways and step edges
-
White: High visibility on darker floors, or where white line-marking is preferred
Sizes & Roll Length
Available in 4 widths, each roll is 18 metres long:
-
25mm × 18m
-
50mm × 18m
-
100mm × 18m
-
150mm × 18m
Key Features
-
High-visibility safety options (including yellow/black hazard striping)
-
Heavy-duty aluminium-oxide grit for surefooted traction
-
Vinyl backing + solvent-acrylic adhesive for lasting hold
-
Weather-resistant for indoor/outdoor use
-
Fast, clean application and easy to cut to length
Best For
-
Stair nosings and step edges
-
Loading docks and warehouse walkways
-
Access ramps and emergency egress routes
-
Machinery platforms and mezzanines
-
Marking “do not cross / watch your step” zones
Installation Notes
-
Surface prep matters: Apply to clean, dry, smooth, sealed surfaces. Remove dust, oil, and residue.
-
Position carefully: Once it grabs, it means it.
-
Apply pressure: Press firmly and use a roller for full contact (especially edges).
-
Edge sealing recommended: In wet or high-traffic areas, seal edges to reduce lifting.
-
Test first: Always test a small area to confirm adhesion and finish compatibility.
No delivery surcharge on orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.
Create visible hazard zones with dependable traction. RiteGrip™ Anti-Slip Tape combines an aggressive, industrial-grade grit with a tough vinyl backing to help reduce slips on stairs, ramps, platforms and walkways.
Choose from four colour options—Yellow/Black Striped, Black, Yellow, or White—all using a durable solvent-acrylic adhesive designed to bond strongly to clean, smooth, sealed surfaces, indoors or outdoors.
Colour Options
Pick the look that matches your safety plan and site layout:
-
Yellow/Black Striped: High-contrast hazard marking for edges, steps, and danger zones
-
Black: Clean, low-contrast traction for general safety upgrades
-
Yellow: Bright visibility for walkways and step edges
-
White: High visibility on darker floors, or where white line-marking is preferred
Sizes & Roll Length
Available in 4 widths, each roll is 18 metres long:
-
25mm × 18m
-
50mm × 18m
-
100mm × 18m
-
150mm × 18m
Key Features
-
High-visibility safety options (including yellow/black hazard striping)
-
Heavy-duty aluminium-oxide grit for surefooted traction
-
Vinyl backing + solvent-acrylic adhesive for lasting hold
-
Weather-resistant for indoor/outdoor use
-
Fast, clean application and easy to cut to length
Best For
-
Stair nosings and step edges
-
Loading docks and warehouse walkways
-
Access ramps and emergency egress routes
-
Machinery platforms and mezzanines
-
Marking “do not cross / watch your step” zones
Installation Notes
-
Surface prep matters: Apply to clean, dry, smooth, sealed surfaces. Remove dust, oil, and residue.
-
Position carefully: Once it grabs, it means it.
-
Apply pressure: Press firmly and use a roller for full contact (especially edges).
-
Edge sealing recommended: In wet or high-traffic areas, seal edges to reduce lifting.
-
Test first: Always test a small area to confirm adhesion and finish compatibility.
No delivery surcharge on orders over $98. If the amount is not reached, a single $18 fee will be applied to your total.
For more information please access our Shipping and Returns T&C page.